1. New type with heating developer and fixer function
2. Small volume, open-room operation, free adjustment of film developing speed, sealed and environmentally friendly,
3. This machine could automatically complete film development and fixation rinse. Therefore, the problems of environmental pollution and body injury to operating staff caused by manual operation of injection and darkroom have been totally resolved
Multi-film developing disposal may be completed when the developer and fixer is at 18-25 centigrade.
4. One piece of film enters per 30 seconds for multi-fill developing disposal, and the development may last 2-8 minutes. It is adjusted in accordance with the exposure conditions of x-ray machine.
5. Multiple films of 2x3, 3x4, and 2.7x5.4 cm are applicable for the treatment of development.
6. Regular maintenance is convenient. No extra tool is needed to replace chemical solutions or wash relative parts.
Surroundings temperature: 18℃-30℃;
Atmospheric pressure: 700hPa-1060hPa;
Voltage of electrical source: 110V/220V± 10%
Frequency of electrical source: 50/60Hz± 1Hz.
Input Power: <12w
Film Run through Time: 2-8min
Weight of Unit: 6.0kg,
Processing time of film
The time which develops films needed is 2min-8min, and can be accommodated continuously. The error is within± 10%.
During the bathing process, light leaking is not permitted.
The stability of film delivery
The delivery mechanism of film should not lacerate or lock films.
The timing panel of transit film
The timing panel of transit film adopts the number 1-12 represents month, each scale represents 10 days.