MICRO-NX® New Micro Motor M4-170SH 50,000rpm
1. High Tech, state of art design.
2. Hand/ foot mode and forward/ reverse direction.
3. Speed is adjustable 40,000 - 50,000
4. DC out A&B
5. Low noise, Low vibration.
7. No heat after long hours of operation by effective electrical design.
8. This type of micro motor can connect 2 handpiece at same time.
Denture processing, processing of jade jewelry, nail, stone carving, wood carving.
Voltage: 110V/ 220V
Handpiece Max Torgue:400/450 gf.cm
Output Power: DC0-30V
Collect size: 2.35 / 3.0 /3.175 (mm)
On/ Off pedal
Stand Along Handpiece