Professional Nail Tooth Polishing Micro Motor 30,000rpm JD4500
Micromotor JD4500 for professional nail tooth polishing, adjustable speed from 0 to 30,000 rpm, CE certification.
Quick and easy change of rotation left or right hand
His piece has a light hand with ease and reduces wrist strain
Claw with perfect concentricity and Japanese rolling ensure the quality of the handpiece: little heat, low noise, low vibration.
Speed up to 30,000 rpm
Voltage supplied: 100-120 / 220V-240V; 50-60Hz
Weight: 830g (body control); 163g (handpiece)
Dimensions: 97 x 150 x 85mm (remote control); Φ27 x 137mm (handpiece)
Speed: 0 to 30 000 revolutions / min
Torque: 2.2 N.cm
Control box x 1
Handpiece x 1
Support 1 x
Foot pedal x 1
Power cord x 1
Insert the plug of the handpiece in dedicated outlet
Insert the plug of the pedal into the dedicated
Select the direction of use and speed
Changing bits with a click of the handpiece
Use the correct power, do not use continuously at full power
Use the nail grinder once all connections (catch and fittings) properly connected.
Adjust the speed gradually and do not touch any rotating part when the sander works.
When changing direction, stopping the engine.
When changing the hand or foot off the engine.
Do not put a cloth or something on the air vents of the housing or pens.
Clean any dust that could be deposited regularly.