Wall Mounted Dental X-ray Unit JYF-10B
This x-ray unit is an essential diagnostic equipment for dentist with features as following:
a). Simple structure: The x-ray generator, central controller and unit frame are integrated into one unit.
b). Good protection: The radiation is much lower than national protecting standard.
c). Digital circuit: The digital circuit makes exposure time accurately
2. Main use
The unit is particularly provided for synthesis hospitals、cavity specialty hospital and dental clinic to take photo.
3. Technical Specifications
tube voltage: 60KV±10%
tube current: ８mA±20%
exposal time: 0.2～4.0s
input power: ＜600VA
output power: P≈339VA
irradiation diameter: 52mm
fuse: RF1-20- 5A
capacity: 60KV . ８mA .
the way of operation :breake load;continuous operation
the weigh of x-ray source:7.5Kg
the variation rate of high-voltage generator 1:226
manufactory:hangzhou wandong electrical Co.Ltd.
The time of loading follows R’10
up-down range of X-ray head: 400mm
forward-back range of X-ray head: 200mm
level axis turning angle of head: 360°
rounding axis angle of head: 270°
life: 6 years
4. Main specifications of X-ray tube
Top working voltage:85KV
Anode thermal capacity:9 KJ
5. Main specifications of X-ray generator
X-ray tube: XD2-1.4/85
Focus value: 1.5mm
Total Al equivalent: 2mmAL
Tube voltage: 60KV
Tube current: 8mA
The unit includes x-ray generator、central controller and machine frame. Figure 1 is in detail.
1. Central controller 2. Horizontal arm 3. Arm component 4. Beam-controller 5. X-ray generator
1. Hand timer 2. Panel Timer 3. Ground Terminal 4. Power Socket 5. Fuse Socket 6. Caution Output 7. Exposure Switch
In order to transport conveniently, the unit is disassembled and packed in parts. Please check the parts according packing list to make sure all the parts are in good condition. And then clean the antiseptic oil and dust to prepare installation.